$1,650.00 – $1,730.00
To place an order CALL 786-391-3142 or EMAIL firstname.lastname@example.org
****Coil seat for IMS59-50700 should be set at 213mm(8.38″) and IMS59-50574 should be set at 226mm(8.89″) from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
For a lift of 3″ in the rear, new extended brake lines and minimum of 2″ bump stop extensions are required to be used with our long travel rear shocks. At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.
C59-238 – .75-1.0" Lift Stock Load, C59-300 – 1.8" Lift Stock Load, C59-302 – 2.5" Lift Stock Load, C59-314 – 2.5" Lift w/ 80-150lb Added Load, C59-352 – 2.5" Lift w/ 220-300lb Added Load
IMS59-50700 Internal Monotube IFP Shock – 0-2" Lift, IMS59-50574 Internal Monotube IFP Shock 2.5-3.5" Lift (Adds 1" Lift to Coils)
C59-323 – Stock Height, C59-599 1-1.25" Lift, C59-505 – 1.5" Lift, C59-325 – 2" Lift, C59-327 – 2" Lift w/ 220-440lb Constant Load, C59-329 – 2" Lift w/ 660-880lb Constant Load, C59-331 – 2" lift w/ 900-1000lb Constant Load
IMS59-50705 Internal Monotube IFS Shock – 0-3" Lift, Comfort Valving, IMS59-50701 Internal Monotube IFS Shock – 0-3" Lift, IMS59-50575 Internal Monotube IFS Shock 2.5-3.5" Lift (Long Travel)